undefined
Why add nitrogen to the breaker
Release time:
Jul 04,2022
There are two parts in the breaker that are related to nitrogen. The upper cylinder is responsible for storing low-pressure nitrogen, and the accumulator in the middle cylinder is responsible for making the nitrogen work. The accumulator is filled with nitrogen, and the hydraulic breaker is used to store the remaining energy and the recoil energy of the piston, and release the energy at the same time to increase the impact capacity. Usually, the accumulator is installed when the breaker itself cannot reach the impact energy to increase the impact force of the breaker.
Once the amount of nitrogen gas is insufficient, the kinetic energy generated by its compression will also be weakened, and the phenomenon of the broken hammer will be weak. If too much nitrogen is added, the pressure in the accumulator is too high, and the hydraulic oil pressure is not enough to push the cylinder rod upward to compress nitrogen, the accumulator will not be able to store energy, and the breaker will not work. Therefore, if the nitrogen gas increases or decreases, the breaker will not work properly. When adding nitrogen, it is necessary to measure the pressure with a pressure gauge, so that the pressure of the accumulator can be controlled within the normal range, and a little adjustment can be made according to the actual working conditions, which can not only protect the parts, but also achieve good work efficiency.
Jul 04,2022
Jul 04,2022
Jul 04,2022
Jul 04,2022
Add: No.292, Innovation Avenue, High-tech Zone, Jiangyin City, Jiangsu Province, China
Fax: +86-510-86299595
Copyright © 2022 Jiangyin Shiyou Hydraulic Machinery Co.,Ltd.